Site mapELP 31x series
Graphic information stop panels – the ELP 31x series
Page content:
These panels are produced in a 3-line version (single-sided or double-sided) and in a 5-line version. They are suitable for important stops.
Properties of the ELP 31x graphic information LED panels
- High-performance LED board control unit module capable of processing picture at the frequency of 300 Hz.
- Control industrial PC with user HW. It can contain station/stop schedules for autonomous operation (off-line mode).
- MP3 player equipped with an acoustic switchboard (15 W) and with the possibility of sending dispatching announcements right into stop/station speakers.
- Integrated command receiver for the vision impaired which is capable of reading out texts including page turning.
- Led diode illumination regulation controlled by an illumination sensor, each panel side is controlled independently.
- Receiving accurate time.
- LED diode spacing 6,2 mm.
- Possibility of reserving the last line for the JSVV.
- Possibility of using independent windows for displaying texts and graphics.
- Low input power solution – these panels are equipped with LED diode voltage regulators (diodes do not overheat thus prolonging their lifespan).
- Controlled ventilation depending on inner panel temperature.
Electronic information LED panels – 5-line with a clock – the ELP 310 series
-
- Pic. no.2: Graphic information LED stop panel – ELP 310B-20 (drawing)
-
- Pic. no.3: Graphic information LED stop panel – ELP 310B-20
| Basic parameters of LED stop panels – ELP 310B-20 – 5-line version: | |
| Installation | Welded stainless frame |
| LED color | yellow (other colors on demand) |
| Communication interface | Ethernet, Wi-Fi 2,4 GHz, GPRS, Radio, RS 485 |
| Panel measurements (w × h × d) | 1130 × 575 × 372 mm |
| Active surface | 50 × 160 points |
| LED spacing | 6,2 mm |
| Mechanical rendering | Inclinable front (bonnet) including LED panels supported by pistons |
| Weight | 74 kg |
| Working temperature | from -30 °C to +45 °C |
| Relative humidity | 10 % to 95 % at 40°C, non-condensation |
| Illumination control | YES – photosensor on each side of the panel |
| Power supply | 230 VAC / 50 Hz |
| Maximum consumption | 600 W |
| Actual consumption | 130 W |
Electronic information LED panels – 3-line with a clock – the ELP 311 series
-
- Pic. no.4: Electronic stop panel – ELP 311B-20..
-
- Pic. no.5: Electronic stop panel – ELP 311B-20 (field trial).
| Basic parameters of LED stop panels – ELP 311A/B-20 – 3-line version: | |
| Installation | Welded stainless frame |
| LED color | yellow (other colors on demand) |
| Communication interface | Ethernet, Wi-Fi 2,4GHz, GSM/GPRS/UMTS, RS 485 |
| Panel measurements (w × h × d) | 1130 × 575 × 372 mm |
| Active surface | 30 × 160 points – single-sided [type - A]; 2×(30×160) points – double-sided [B] |
| LED spacing | 6,2 mm |
| Mechanical rendering | Inclinable front (bonnet) including LED panels supported by pistons |
| Weight | 63 kg |
| Working temperature | from -30 °C to +45 °C |
| Relative humidity | 10 % to 95 % at 40°C, non-condensation |
| Illumination control | YES – photosensor on each side of the panel |
| Power supply | 230 VAC / 50 Hz |
| Maximum consumption | 400 W – double-sided |
| Actual consumption | 100 W – double-sided |
