ELP 32x series

Graphic information departure LED panels –the ELP 320 series

These panels are best used for displaying up to date schedules. They can also display graphic or text information sent directly from the dispatching. If requested these panels can be equipped with a camera system, communication abilities – a GSM/GPRS, UMTS modem, a WiFi hotspot, outer temperature sensor, a , command receiver for the vision impaired etc.

Departure information LED panel ELP 320

Graphic Information LED panel – type ELP 320 is double-sided, five-line and is designed for a larger bus terminals (6.2 mm pitch LED and the readability from a distance of about 30 meters). It may also have label platform.

Pic. no.7: Graphic information departure LED panel - ELP 320.

Pic. no.7: Graphic information departure LED panel - ELP 320.

Basic properties of the ELP 320-30 panels
LED color yellow
Communication interface Ethernet
Panel measurements (w × h × d) 1128(1558*) × 530 × 222 mm
Active surface 2 x 50 × 160points (double-sided)
LED spacing 6,2 mm
Mechanical rendering Inclinable front (bonnet) including LED panels supported by pistons
Weight 65 kg
Working temperature from -30 °C to +45 °C
Relative humidity 10 % to 95 % at 40°C, non-condensation
Illumination control YES – photosensor on each side of the panel
Power supply 230 VAC / 50 Hz
Maximum consumption 400 W
Actual consumption 70 W

*) This measurement includes an extension for the number of the panel

Properties of the ELP 320 panels

  • High-performance LED board control unit module capable of processing picture at the frequency of 300 Hz.
  • Control industrial PC with user HW. It can contain station/stop schedules for autonomous operation (off-line mode).
  • MP3 player equipped with an acoustic switchboard (15 W) and with the possibility of sending dispatching announcements right into stop/station speakers.
  • Integrated command receiver for the vision impaired which is capable of reading out texts including page turning.
  • LED diode illumination regulation controlled by a sensor; receiving accurate time.
  • LED diode spacing 6,2 mm.
  • Possibility of reserving the last line for the JSVV.
  • Possibility of using independent windows for displaying texts and graphics.
  • Low input power solution – these panels are equipped with LED diode voltage regulators (diodes do not overheat thus prolonging their lifespan).
  • Significantly longer panel lifespan ensured by its controlled ventilation depending on inner panel temperature.
  • Communication using an Ethernet busbar