Site mapELP 30x series
Graphic information LED panels for large junctions – the ELP 30x series
Graphic Information LED panels type ELP 302
Graphic information LED panels of the ELP 302 type are characterized by a large number of displayable signs. They are suitable for big transition junctions. They are designed in such a way that it is easy for a passenger to obtain information regarding departures, platform numbers and delays.
Pic. no.1: ELP 302.
| Basic parameters of the ELP 302.04 panels | |
| Installation | Welded stainless frame of the RAL 7010 color or other colors if requested |
| LED color | red (other colors on demand) |
| Communication interface | Ethernet, Wi-Fi 2,4 GHz, GSM/GPRS/UMTS, RS 485 |
| Panel measurements (w × h × d) | 1130 × 575 × 372 mm |
| Active surface | 50 × 160 points |
| LED spacing | 6,2 mm (other on demand) |
| Mechanical rendering | Inclinable front (bonnet) including LED panels supported by pistons |
| Working temperature | from -30 °C to +45 °C |
| Relative humidity | 10 % to 95 % at 40°C, non-condensation |
| Weight | 50 kg |
| Illumination control | YES – photosensor |
| Power supply | 230 VAC / 50 Hz |
| Maximum consumption | 400 W. |
| Actual consumption | 70 W |
Properties of the ELP 302 panels
- High-performance LED board control unit module capable of processing picture at the frequency of 300 Hz.
- Control industrial PC with user HW. It can contain station/stop schedules for autonomous operation (off-line mode).
- MP3 player equipped with an acoustic switchboard (15 W) and with the possibility of sending dispatching announcements right into stop/station speakers.
- Integrated command receiver for the vision impaired which is capable of reading out texts including page turning.
- LED diode illumination regulation controlled by a sensor; receiving accurate time.
- Wide-angle camera for sending pictures and videos of the number and behavior of the passengers at stops.
- LED diode spacing can be 6,2 mm .
- Possibility of improving panel information abilities by adding a stop information stand: I-POINT with touchscreen control and a voice interface for direct passenger – dispatcher communication.
- Possibility of reserving the last line for the JSVV.
- Possibility of using independent windows for displaying texts and graphics.
- Low input power solution – these panels are equipped with LED diode voltage regulators (diodes do not overheat thus prolonging their lifespan).
- Controlled ventilation depending on inner panel temperature.
