Unmanaged ethernet switch ECU-08LMT
Unmanaged ethernet switch ECU-08LM.xT-05
A small ethernet busbar unit with 8 ports – economical version with extra 7x PoE output using negotiation as per the IEEE 802.3 at standard. These PoE outputs are primarily designed to power cameras in vehicles with output power supply -48V where the camera stream is stored on an external device in the vehicle – EPIS 4.0x, EPIS 5.0x or on a tachograph or elsewhere. The -48V voltage was chosen to ensure save connection of other devices – e.g. notebooks.
This ECU switch has mechanical measurements given by using M12 connectors. Its basic technical parameters are:
Parameter specification of the ECU-08LM.7T-H05 unit | |
Casing material | Sheet metal box |
Installation | H – horizontal installation (standard version) |
Number of ethernet ports | 8 (8 port ethernet switch) |
Connector type | M12 – coding type D |
Buffer | 128 Kbytes |
Supported protocols | IEEE 802.3 10BaseT, IEEE 802.3 100BaseTX |
Number of MAC entries | 1000 entries |
Operation temperature | -30°C – 70°C |
Measurements (H x W x D) | 227 x 523 x 105 mm (including
anchor WAGO sides) |
Weight | 560 g |
Power supply voltage |
|
Maximum consumption |
|
PoE power supply output |
|
PoE type | As per IEEE 802.11 at (with negotiation) |
Signal LED |
|
Permeability | 2Gbps |